It seems some features are "grayed" out, like using "open with file explorer" in Library toolbar.

I'm working out all the bugs in the SharePoint 2013 environment. Right now I'm trying to get a SP 2013 Workflow to actually work.

I'm trying the simplest thing I can.  Just go to the end of the workflow.

I've got one stage.  In transition I have GOTO "End of Workflow". 

When I start the workflow it creates the page as if it is running but stays stuck under "Running Workflows".  It does not log anything if I attempt to write a log.

I've tried this on both a new and updated (from 2010) site.  Neither work.  SP10 workflows work fine.

David Jenkins

Hi,

When I select a document template to upload new document in a sharepoint 2013 document library, the excel begins to load the template. However, before finishing the load, Excel crashes and I have this error displayed.

pcname: unknown
desknumber: ******

int tel: ****

Any thoughts please.

Regards

Hello, I'm attempting to install SPF 2013 as a standalone instance on Windows Server 2012, and all goes fine until step 7/10 of the config wizard, when I get the below error:

Failed to provision the SharePoint Central Administration Web Application.
An exception of type System.NullReferenceException was thrown.  Additional exception information: Object reference not set to an instance of an object.
System.NullReferenceException: Object reference not set to an instance of an object.
   at Microsoft.SharePoint.Administration.SPAspSiteMapFile.MergeAspSiteMapFiles(XmlDocument xmldocSiteMap, String strSrcFilePath, String strMergeFilePattern)
   at Microsoft.SharePoint.Administration.SPAspSiteMapFile.Copy(String strSrcDir, String strSrcDirPrevious, String strSrcLeaf, String strDestDir, Boolean bMergeMaps, Boolean bBackupExistingFile)
   at Microsoft.SharePoint.Administration.SPWebApplication.CopyAppDomainDirectories(DirectoryInfo vrPath, OverwriteSetting overwrite)
   at Microsoft.SharePoint.Administration.SPAdministrationWebApplication.InstallFiles(DirectoryInfo virtualDirectoryPath, String validationKey, String decryptionKey)
   at Microsoft.SharePoint.Administration.SPWebApplication.Provision()
   at Microsoft.SharePoint.Administration.SPAdministrationWebApplication.Provision()
   at Microsoft.SharePoint.Administration.SPWebServiceInstance.Provision()
   at Microsoft.SharePoint.PostSetupConfiguration.CentvalAdministrationSiteTask.ProvisionAdminVs()
   at Microsoft.SharePoint.PostSetupConfiguration.CentralAdministrationSiteTask.Run()
   at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()

The admin.sitemap file is there in the _app_bin directory, so it's not clear why the procedure is failing with the NullReferenceException error. Any tips on this are much appreciated!

Hiya,

I am simply unable to get Per-User identity to work. This is not my first BI installation, but the only one where I am stuck.

I have configured Kerberos constrained delegation around and verified the following:

1: In the security log of the application server I logon to the web application using Kerberos.

2: I can logon to the Analysis services and view cubes from Excel 2010 using Kerberos.

3: I can use "klist get" and retrieve a Kerberos ticket on the Analysis Services SPN.

4: Claims to Windows token service is running under domain account and all permissions has been granted as well as similar delegations as to the PerformancePoint service account.

My problem is; When I enter a datasource in the dashboard designer, it states user does not have access. In the application event log, it states that the user, does not have access to the datasource. Using SQL Profiler I can see that it is hitting the Analysis Services as Anonymous User. My conclusion is the delegation for the PerformancePoint account is not working.

The Performance Point service account is currently delegated against the MSOLAPSvc.3 service on the Analysis Services server, against the MSSQLSvc service against the database services server and against the HTTP service on the SP application server.

This is a very large organization, however we waited over a night to ensure it wasn't a "waiting for replication" issue.

I have tried this multiple times before, without issues. I did a double check following the referenced guide:

http://www.microsoft.com/en-us/download/confirmation.aspx?id=23176

Any ideas what I could be missing or what I can test further?

Application Event Log entry:

The user "<User Name>" does not have access to the following data source server.

Data source location: https://<BI Center site>/Data Connections/1_.000
Data source name: New Data Source
Server name: <Server Name>

Exception details:
Microsoft.AnalysisServices.AdomdClient.AdomdConnectionException: The connection either timed out or was lost. ---> System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
   at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
   --- End of inner exception stack trace ---
   at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
   at System.IO.BufferedStream.Read(Byte[] array, Int32 offset, Int32 count)
   at Microsoft.AnalysisServices.AdomdClient.DimeRecord.ForceRead(Stream stream, Byte[] buffer, Int32 length)
   at Microsoft.AnalysisServices.AdomdClient.DimeRecord.ReadHeader()
   at Microsoft.AnalysisServices.AdomdClient.DimeReader.ReadRecord()
   at Microsoft.AnalysisServices.AdomdClient.TcpStream.GetResponseDataType()
   --- End of inner exception stack trace ---
   at Microsoft.AnalysisServices.AdomdClient.XmlaClient.EndRequest()
   at Microsoft.AnalysisServices.AdomdClient.XmlaClient.CreateSession(ListDictionary properties, Boolean sendNamespaceCompatibility)
   at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Microsoft.AnalysisServices.AdomdClient.AdomdConnection.IXmlaClientProviderEx.CreateSession(Boolean sendNamespaceCompatibility)
   at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.ConnectToXMLA(Boolean createSession, Boolean isHTTP)
   at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.Open()
   at Microsoft.PerformancePoint.Scorecards.DataSourceProviders.AdomdConnectionPool`1.GetConnection(String connectionString, ConnectionContext connectionCtx, String effectiveUserName, CultureInfo culture, NewConnectionHandler newConnectionHandler, TestConnectionHandler testConnectionHandler, String targetAppId)

Hi All - I have a SharePoint 2013 on Windows Server 2012. We had SP 2010 and we just migrated to 2013. I am planing on Disaster Recovery. I prepared the scripts to take the regular backup of entire the web application and individual site collections. Also, Database Backup. SQL Server 2008 R2 is on server different than Front end and application server. There is only one farm. DC is on a different server. Any custom file is on Visual Source safe. I need to know what could be possible scenario to perform disaster recovery test?

Regards,

Khushi

I was going through our farm and checking that the correct services were started on the correct servers and noticed that on one of the WFEs the Claims to Windows Token Service was stopped. I attempted to start the service and after a minute the "Starting" status changed to "Error Starting". I went to the Even View on the server and the error said "An attempt to start/stop instance of service Clames to windows Token Service on server did not succeed. Re-run the action via UI or command line on the specified server. Additional information is below." And below it said "Illegal Characters in Path". After trying again several times and still recieving the same error, I searched online but couldn't find any related articles. I also turned on Verbose logging and grabbed the ULS log for the error: "Error executing service instance (un)provisioning job. Service instance: "Claims to windows token service" "Illegal Characters in Path."" Also, "System.argumentException: Illegal characters in path. at System.IO.Path.GetFileName(String Path) at System.IO.FileStream..ctor(String Path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize) at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteURi, String role, Type ofObjectToReturn)..."

I have been unable to solve the issue or get the service to start. I have already rebooted the server as well with the problem still persisting.

Any Ideas or help?

What happens to users' objects as their profiles are being deleted from SharePoint 2013? We are replacing the default profile and MySite removal timers with custom scripts in a fairly new deployment.

In other words, say a user contributed to list items as an author. Do they still show up as users and authors of the respective items? Is their name clickable? I can't readily experiment with this.

Also, do users need to be removed from all webs as well as all particular objects where a user has unique permissions, such as a list item?

Any suggestions would be appreciated.

Thanks.

Radu P.

Hello,

Please help me. I need a powershell script which can do the following things.

1.       List of all sharepoint user profiles with email address spadmin@xxxx.com
2.       List of all FBA user profiles with email address  spadmin@xxxx.com
3.      List of all Pending Access Requests

Any help is much appreciated. Thanks.

chirag

hello. thanks for the time.

the other day we setup 2 SharePoint 2013 WFE with SMTP services to receive incoming mail.  and they both are...however the problem is that FE1 takes in about 75% of the emails in the drop folder while FE2 takes the remaining 25%.  Any way this can be done 50/50?

Also we have a public folder that forwards emails to a document library about every second...so we are getting backed up in the queue.  is it possible to have a dedicated Drop folder on a network share?  we tried to add a network share but the Front End IIS virtual SMTP service does not allow a network location...looks like it must be local to the server and I am guessing it would have to be a member of farm.  weird thing is we didn't see the issue in SP2010 ... it was able to handle the load on 2 front end servers.

thanks again for the time and effort.

I have a live helpdesk application which was previously running on SP 2010 where the lists periodically update (60 sec) using the standard web part AJAX controls. In the SP2013 solution this same set of controls results in an error.

Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer. If the problem persists, contact your Web server administrator.

This error has some suggested solutions in the public forums on SP2010 most of which seem to center around the refresh timeout rate which was set to 1 second. there was a cumulative update for SP2010 to allow access to the timeout variable and be able to adjust this value up to a more reasonable value, but so far I have been unable to locate this in SP2013.

Any help, suggestions or advice would be more than welcome.

thank you in advance.

Following a reboot of the sql server and sharepoint servers on Friday, workflows which involve sending an email fail. They start with this detail:

Retrying last request. Next attempt scheduled in less than one minute. Details of last request: HTTP InternalServerError to http://sp.zelle.com/sites/ZelPoint/_vti_bin/client.svc/sp.utilities.utility.SendEmail Correlation Id: aac7df38-aa5d-4ae1-aabc-bc5541f9b8e2 Instance Id: 8ecd608c-aea0-4bca-8c25-221111144f22

Eventually, the workflow is canceled with this error:

RequestorId: b59c932c-7c3b-2b5f-c304-eebcbe9341d6. Details: System.ApplicationException: HTTP 500 {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["94"],"SPRequestGuid":["bcc3c429-f040-482a-b78f-66dddde31fec"],"request-id":["bcc3c429-f040-482a-b78f-66dddde31fec"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1; RequireReadOnly"],"MicrosoftSharePointTeamServices":["15.0.0.4569"],"Cache-Control":["max-age=0, private"],"Date":["Mon, 04 Aug 2014 14:45:37 GMT"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]}   at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context)   at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)   at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)

I checked the ULS logs and found some errors such as these:

Reached maximum number of failed machines based on ping results for this routing group

Regards’ of client  : Windows 8.1 + IE 12  or Windows 7 + IE 8.

I have  Enabled Kerberos authentication and basic authentication. I use only HTTPS.

If i add SharePoint site in to local intranet zone, i logon without prompting user name and password.

If i logon wit computer that is not domain joined i get prompt for user name and password. I did put SharePoint site to local intranet zone and i did put remember user name and password.

There is no way, that  non  domain joint computer can logon to SharePoint site without prompt in picture.

Would Form Based authentication solved my problem ?

If I enable site feature on Any site  in any site collection on Sharepoint farm,  every one get lock out (include Farm admin, ect)  with error Sorry, you don't have access to this page.

I have to  go to Web application -> User Policies Add: NT Authority\Authenticated Users, so that I can log in to site, disable feature and everything start to work.

On : Site Collection Administration -> Site Collection Features -> SharePoint Server Publishing Infrastructure : is activated

Infrastructure : I use  Host name site collection, all effected sites are located in the same web application.

I think  problem is with “SharePoint Server Publishing Infrastructure”. Because if I enable that feature on site collection, then o have problem choosing together  SharePoint Server Standard Site Collection features and SharePoint Server Enterprise Site Collection features

If SharePoint Server Publishing Infrastructure is enabled, if a activate Standard Site Collection features , then choosing Server Enterprise Site Collection features, produce error : Sorry, something went wrong.

But I can  enabled both features “Standard Site  & Server Enterprise” before enabling SharePoint Server Publishing Infrastructure.

ULS logs, when I enable SharePoint Server Publishing Infrastructure :

-

From bottom up : Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|DOMAIN\user1, ClaimsCount=55

-

DelegateControl: Exception thrown while adding control 'Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapDataSource': System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))   

 at Microsoft.SharePoint.Utilities.SPUtility.HandleAccessDenied(Exception ex)   

 at Microsoft.SharePoint.Library.SPRequest.GetMetadataForUrl(String bstrUrl, Int32 METADATAFLAGS, Guid& pgListId, Int32& plItemId, Int32& plType, Object& pvarFileOrFolder)   

 at Microsoft.SharePoint.SPWeb.GetList(String strUrl)   

 at Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site)   

 at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean useContextSite, Boolean allowContextSiteOptimization, Boolean refreshIfNoContext)   

 at Microsoft.SharePoint.Publishing.CachedAreaLookup.EnsureLookup(Boolean errorsAsExceptions)   

 at Microsoft.SharePoint.Publishing.CachedAreaLookup.GetCachedAreaOrException()   

 at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigationCache.GetCachedWebInfo(CachedAreaLookup cachedAreaLookup)   

 at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigationCache.GetWebNavigationSettings(CachedAreaLookup cachedArea, CachedAreaLookup& parentCachedArea, Exception& loadError)   

 at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigation.GetEffectiveProviderSettingsList(CachedAreaLookup cachedArea, Boolean includeInheritedSettings)   

 at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigation.GetEffectiveProviderSettings[T](CachedAreaLookup cachedArea, String siteMapProviderName, Boolean includeInheritedSettings, CachedAreaLookup& cachedAreaWithSettings)   

 at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigation.GetEffectiveProviderSettings[T](SPWeb web, String siteMapProviderName, Boolean includeInheritedSettings)   

 at Microsoft.SharePoint.Publishing.Navigation.SwitchableSiteMapProvider.GetCurrentWrappedProvider()   

 at Microsoft.SharePoint.Publishing.Navigation.SwitchableSiteMapProvider.get_RootNode()   

 at Microsoft.SharePoint.Publishing.Navigation.SwitchableDataSourceBehavior.AssignProperties(SiteMapProvider targetProvider)   

 at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapDataSource.OnInit(EventArgs e)   

 at System.Web.UI.Control.InitRecursive(Control namingContainer)   

 at System.Web.UI.Control.AddedControl(Control control, Int32 index)   

 at Microsoft.SharePoint.WebControls.DelegateControl.AddControlResilient(Control ctl)

-

System.IO.FileNotFoundException: The system cannot find the file specified. (Exception from HRESULT: 0x80070002), StackTrace:  

 at Microsoft.SharePoint.SPWeb.GetObjectForUrl(String strUrl, Guid& listId)   

 at Microsoft.SharePoint.Utilities.SPUtility.<>c__DisplayClass9.<FindObjectAccessed>b__8()   

 at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()   

 at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)   

 at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)   

 at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)   

 at Microsoft.SharePoint.Utilities.SPUtility.FindObjectAccessed(SPWeb web, SPSite site, SPObjectType& objType, String& strObject, String& strListItemId)   

 at Microsoft.SharePoint.Utilities.SPUtility.RedirectToAccessDeniedPage(HttpContext context)   

 at Microsoft.SharePoint.Utilities.SPUtility.HandleAccessDenied(HttpContext context)   

 at Microsoft.SharePoint.Utilities.SPUtility.HandleAccessDenied(Exception ex)   

 at Microsoft.SharePoint.Library.SPRequest.GetMetadataForUrl(String bstrUrl, Int32 METADATAFLAGS, Guid& pgListId, Int32& plItemId, Int32& plType, Object& pvarFileOrFolder)   

 at Microsoft.SharePoint.SPWeb.GetList(String strUrl)   

 at Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site)   

 at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean useContextSite, Boolean allowContextSiteOptimization, Boolean refreshIfNoContext)   

 at Microsoft.SharePoint.Publishing.CachedAreaLookup.EnsureLookup(Boolean errorsAsExceptions)   

 at Microsoft.SharePoint.Publishing.CachedAreaLookup.GetCachedAreaOrException()   

 at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigationCache.GetCachedWebInfo(CachedAreaLookup cachedAreaLookup)   

 at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigationCache.GetWebNavigationSettings(CachedAreaLookup cachedArea, CachedAreaLookup& parentCachedArea, Exception& loadError)   

 at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigation.GetEffectiveProviderSettingsList(CachedAreaLookup cachedArea, Boolean includeInheritedSettings)   

 at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigation.GetEffectiveProviderSettings[T](CachedAreaLookup cachedArea, String siteMapProviderName, Boolean includeInheritedSettings, CachedAreaLookup& cachedAreaWithSettings)   

 at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigation.GetEffectiveProviderSettings[T](SPWeb web, String siteMapProviderName, Boolean includeInheritedSettings)   

 at Microsoft.SharePoint.Publishing.Navigation.SwitchableSiteMapProvider.GetCurrentWrappedProvider()   

 at Microsoft.SharePoint.Publishing.Navigation.SwitchableSiteMapProvider.get_RootNode()   

 at Microsoft.SharePoint.Publishing.Navigation.SwitchableDataSourceBehavior.AssignProperties(SiteMapProvider targetProvider)   

 at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapDataSource.OnInit(EventArgs e)   

 at System.Web.UI.Control.InitRecursive(Control namingContainer)   

 at System.Web.UI.Control.AddedControl(Control control, Int32 index)   

 at Microsoft.SharePoint.WebControls.DelegateControl.AddControlResilient(Control ctl)   

 at Microsoft.SharePoint.WebControls.DelegateControl.CreateChildControlsInternal()   

 at Microsoft.SharePoint.WebControls.DelegateControl.CreateChildControls()   

 at System.Web.UI.Control.EnsureChildControls()   

 at Microsoft.SharePoint.WebControls.DelegateControl.OnInit(EventArgs e)   

 at System.Web.UI.Control.InitRecursive(Control namingContainer)   

 at System.Web.UI.Control.InitRecursive(Control namingContainer)   

 at System.Web.UI.Control.InitRecursive(Control namingContainer)   

 at System.Web.UI.Control.InitRecursive(Control namingContainer)   

 at System.Web.UI.Control.InitRecursive(Control namingContainer)   

 at System.Web.UI.Control.InitRecursive(Control namingContainer)   

 at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)   

 at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)   

 at System.Web.UI.Page.ProcessRequest()   

 at System.Web.UI.Page.ProcessRequest(HttpContext context)   

 at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()   

 at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)   

 at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)   

 at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)   

 at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)   

 at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)   

 at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)   

 at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)   

 at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)   

 at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)   

 at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)

-

SPRequest.GetMetadataForUrl: UserPrincipalName=, AppPrincipalName= ,bstrUrl=/_layouts/15/ManageFeatures.aspx ,METADATAFLAGS=59

-

Unknown SPRequest error occurred. More information: 0x80070002

-

Access Denied. Exception: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)), StackTrace: 

 at Microsoft.SharePoint.Library.SPRequestInternalClass.GetMetadataForUrl(String bstrUrl, Int32 METADATAFLAGS, Guid& pgListId, Int32& plItemId, Int32& plType, Object& pvarFileOrFolder)   

 at Microsoft.SharePoint.Library.SPRequest.GetMetadataForUrl(String bstrUrl, Int32 METADATAFLAGS, Guid& pgListId, Int32& plItemId, Int32& plType, Object& pvarFileOrFolder).

-

System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)), StackTrace:  

 at Microsoft.SharePoint.SPWeb.GetList(String strUrl)   

 at Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site)   

 at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean useContextSite, Boolean allowContextSiteOptimization, Boolean refreshIfNoContext)   

 at Microsoft.SharePoint.Publishing.CachedAreaLookup.EnsureLookup(Boolean errorsAsExceptions)   

 at Microsoft.SharePoint.Publishing.CachedAreaLookup.GetCachedAreaOrException()   

 at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigationCache.GetCachedWebInfo(CachedAreaLookup cachedAreaLookup)   

 at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigationCache.GetWebNavigationSettings(CachedAreaLookup cachedArea, CachedAreaLookup& parentCachedArea, Exception& loadError)   

 at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigation.GetEffectiveProviderSettingsList(CachedAreaLookup cachedArea, Boolean includeInheritedSettings)   

 at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigation.GetEffectiveProviderSettings[T](CachedAreaLookup cachedArea, String siteMapProviderName, Boolean includeInheritedSettings, CachedAreaLookup& cachedAreaWithSettings)   

 at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigation.GetEffectiveProviderSettings[T](SPWeb web, String siteMapProviderName, Boolean includeInheritedSettings)   

 at Microsoft.SharePoint.Publishing.Navigation.SwitchableSiteMapProvider.GetCurrentWrappedProvider()   

 at Microsoft.SharePoint.Publishing.Navigation.SwitchableSiteMapProvider.get_RootNode()   

 at Microsoft.SharePoint.Publishing.Navigation.SwitchableDataSourceBehavior.AssignProperties(SiteMapProvider targetProvider)   

 at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapDataSource.OnInit(EventArgs e)   

 at System.Web.UI.Control.InitRecursive(Control namingContainer)   

 at System.Web.UI.Control.AddedControl(Control control, Int32 index)   

 at Microsoft.SharePoint.WebControls.DelegateControl.AddControlResilient(Control ctl)   

 at Microsoft.SharePoint.WebControls.DelegateControl.CreateChildControlsInternal()   

 at Microsoft.SharePoint.WebControls.DelegateControl.CreateChildControls()   

 at System.Web.UI.Control.EnsureChildControls()   

 at Microsoft.SharePoint.WebControls.DelegateControl.OnInit(EventArgs e)   

 at System.Web.UI.Control.InitRecursive(Control namingContainer)   

 at System.Web.UI.Control.InitRecursive(Control namingContainer)   

 at System.Web.UI.Control.InitRecursive(Control namingContainer)   

 at System.Web.UI.Control.InitRecursive(Control namingContainer)   

 at System.Web.UI.Control.InitRecursive(Control namingContainer)   

 at System.Web.UI.Control.InitRecursive(Control namingContainer)   

 at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)   

 at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)   

 at System.Web.UI.Page.ProcessRequest()   

 at System.Web.UI.Page.ProcessRequest(HttpContext context)   

 at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()   

 at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)   

 at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)   

 at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)   

 at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)   

 at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)   

 at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)   

 at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)   

 at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)   

 at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)   

 at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)

-

SPRequest.GetMetadataForUrl: UserPrincipalName=i:0).w|s-1-5-21-1794000256-2036170096-312552118-17692, AppPrincipalName= ,bstrUrl=/Cache Profiles ,METADATAFLAGS=59

-

Feature Activation: Feature 'PublishingSite' (ID: 'f6924d36-2fa8-4f0b-b16d-06b7250180fa') was activated at URLhttps://intranet.domain.com.

-

-

Calling 'FeatureActivated' method of SPFeatureReceiver for Feature 'PublishingSite' (ID: 'f6924d36-2fa8-4f0b-b16d-06b7250180fa').

-

Feature Activation: Activating Feature 'PublishingSite' (ID: 'f6924d36-2fa8-4f0b-b16d-06b7250180fa') at URLhttps://intranet.domain.com.

-

Hello,

I've a huge sharePoint content database. This Content database was migrated to SharePoint 2010 approx. 2 years ago.
Now I'm trying to migrate this database to SharePoint 2013.

I executed Test-SPContentDatabase, Mount-SPContentDatabase and the database attached successfully to the new SharePoint 2013 farm. All the migrated content is available and all custom Features are working as expected.

But the UI-Upgrade process is producing over 9.000 Errors. A lot of them are:

Feature upgrade incomplete for Feature 'Publishing' (Id: 15/'22a9ef51-737b-4ff2-9346-694633fe4416') in Web
'http://xxxxx'. Exception: Invalid field name.
{8484dbaf-e6d2-4f98-9aa7-e19f89260224}  /Variation Labels 61fba69c-193a-30bd-b0b4-77dd0e8b1166
07/22/2014 14:55:57.01 OWSTIMER (0x1558) 0x1940 SharePoint Foundation Upgrade SPFeatureDefinition

Feature upgrade action 'CustomUpgradeAction.EnsureVariationsInfrastructure' threw an exception upgrading Feature 'Publishing'
(Id: 15/'22a9ef51-737b-4ff2-9346-694633fe4416') in Web 'http://xxx':
Invalid field name. {8484dbaf-e6d2-4f98-9aa7-e19f89260224}  /Variation Labels 61fba69c-193a-30bd-b0b4-77dd0e8b1166

Feature upgrade action 'CustomUpgradeAction.EnsureVariationsInfrastructure' threw an exception upgrading Feature 'Publishing'
(Id: 15/'22a9ef51-737b-4ff2-9346-694633fe4416')
in Web 'http://xxxx': Invalid field name. {8484dbaf-e6d2-4f98-9aa7-e19f89260224}  /Variation Labels 61fba69c-193a-30bd-b0b4-77dd0e8b1166

All necessary language packs are installed.

I tried this without success:

http://social.technet.microsoft.com/Forums/de-DE/00bf12f7-730d-4ff6-a973-ce1bf92d4691/error-while-upgrading-2010-mode-site-collection-in-2013-to-2013-mode-site-collection?forum=sharepointadmin

Maybe someone has some tips for me?

-

Hi All,

Am not able to do edit sharepoint 2013 subsite, when i go to site action-->edit page, page not editing mode i have full permission for this site.

Please advice, Thanks in advance!!

Srinivas

Greetings,

I have a real issue happening since yesterday and I cannot figure out how to resolve it. I installed the last update for SharePoint Server 2013 (KB2881003, KB2881077, KB2863826, KB2863837) and since then, the drag & drop functionnality does not work in any WebPart Pages in IE10. It's working well with Firefox and Chrome... Sometimes it's working in IE10 when I refresh the page...

I really don't know what can I check to make this working correcty, so please if you have any idea just let me know.

Thanks in advance for your answer.

Mike