Hello Everyone
I have default sharepoint 2013 on sharepoint server. Now i want to create one more public url which anyone can access from outside who have access to the sharepoint site.
Do i just need to map it using alternate access mapping? Or do i need to extend web application and create site and then map it?
Please advice
Thanks
I have a SharePoint 2013 installation that is a tenant collection only (no outward facing parts or external access) set up for publishing. There are approximately 5 sites within the site collection, each of which has a few web parts (libraries, lists, folders, etc.) The social networking features are turned off.
RSS is enabled for the collection. However, if the RSS is enabled for a site's home page, the RSS feed points at the "Site Pages" page, and not the site's home page. Changes to the newsfeed on the site's home page, for example, do not show up in the RSS feed because it is pointed at the "Site Pages" page. RSS feeds enabled for individual libraies, lists and calendars work as expected.
I suspect this is a configuration issue, although I thought it was working previously. This is a fairly new deployment, so there hasn't been a lot of use yet.
Any ideas or suggestions as to where I might look? I have been through every possible part of the site administration and site collection settings without success.
DNP
- Rick
We are rolling out SharePoint 2013 online (cloud). Unfortunately, we have users who are getting an error when ever they go to a sharepoint page in IE (version 8 is our current standard version). I'm going to try and give as much info as possible, but here is the short description first:
Short description: Some users (both on XP and Win 7) with IE 8 (8.0.6001 on xp and 8.0.7601 on Win7) get an error that causes the suite navigation (Navigation elements like SkyDrive and Sites in the blue bar at the top) to not load.
Details:
Error (this one from an xp machine, but its similar on win7)
Developer tools debugging error:
Highlighted: b.ontimeout=g
Error: Object doesn't support this property or method sposuitenav.js?rev=9NrN%2FQjr08jHbbFVnfXv6A%3D%3D, line 1 character 1143
Work around:
For some reason, if you run the debugger, and then "Continue" after the error, the navigation will load fine with no errors on the page. It will continue to work fine until the user clears their cookies manually.
Most of our users do NOT get this error, but we only have a small pilot group so far and this is a show stopper since we need to roll out to 5000 users eventually.
Note: The following sites are in the trusted site zone for all users, those who are experiencing this and those who are not:
*.microsoftonline.com
*.sharepoint.com
*.sharepointonline.com
-Mike
when I tried to copy a file to another site collection I get the following error message.
"There were 1 error(s) during the copy operation"
"Copying to the destination did not complete successfully"
I'm using sharepoint foundation 2013 and the user has owner access to both libraries.
the collection sites are in the same physical server.
thank you in advance for your help.
We are testing the upgrade to 2013 from 2010 and have completed the database upgrades in the new farm. Everything works, however when you click on someone elses mysite the activity for that person displays as HTML. i.e.
<a href=http://mysite.company.com:80/person.aspx?accountname=DOMAIN%5CUSERNAME title="JOHN DOE">John Doe</a> added 4 new colleagues.<br/><a href='http://mysite.company.com:80/Person.aspx?accountname=DOMAIN%5CJane Doe'>Jane Doe</a>, etc.
Anyone know how to fix this?
After migrating from 2010 to 2013 a lot of our webparts are aligning justified bottom. They look something like this.
Webpart
data Webpart
data data Webpart
data data data
We are using a blank webpart page and they are all aligned top in 2010. Ideas?
Hi,
There is a two ways domain trust and I want users to be able to query info. from both domain.
Users in both domains need to see at least info like,skills, e-mail, phone number and feeds.
Number of staff is 600 Sharepoint 2013 and 300 Sharepoint 2010.
Can I do this if I publish my profile Service Applications btw domain and Configure server-to-server authentication between publishing and consuming farms?
Should I be looking at importing profiles or even consider Active Directory Federation Services.
thanks
Erró
Hi
We've noticed an issue when using AD security groups to secure specific Sharepoint sites. Our problem arose when we created two AD security groups, say, SG-Main and SG-Sub with SG-Sub a Member of SG-Main. We then put a user account, eg Test1, into SG-Sub and secured a Sharepoint site to allow access to SG-Main. Test1 could then access the site - fine.
However when we then removed Test1 from SG-Sub we noticed that Test1's access persisted for the rest of the day. It was only when we tried again the following morning that finally Test1 was given an Access Denied message. Does anyone know what underpins this? Is there a way to force Sharepoint to refresh its 'knowledge' of the security group?
Thanks
I have created a Publishing Web application and I have specified that SharePoint is connected to our company Active Directory. Now all our employees are able to login to the SharePoint publishing site within our intranet without any problems.
But two additional questions just rose in my mind which I cannot figure out:-
1. Let say an employee login to the SharePoint website from him home using his PC ? Will he be able and how he will be able to login to the SharePoint web application?
2. Regarding external customers. I was thinking that we can create new active directory account for each external customer. But this was refused by our system administrator.
So since the SharePoint is connected to AD, so how I can allow external customer (who are not inside our active directory) to login to our SharePoint Publishing site and see cerain pages inside it?
Thanks in advance for any help.
Best Regards
I'm trying to manage a SQL Server table via External Content Type, when I go to the List that was made for this, I get this error in the browser:
Correlation ID:82c8229c-19fa-205d-254f-bbe13774127f
When I look at the SharePoint 2013 log file I see this error.... how do I fix it?
Error while executing web part: Microsoft.BusinessData.MetadataModel.InvalidMetadataPropertyException: The Type name for the Secure Store provider is not valid. ---> System.TypeLoadException: Could not load type 'Secure Store Service' from assembly 'Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.
InnerException 1: System.TypeLoadException: Could not load type 'Secure Store Service' from assembly 'Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.Type.GetType(String typeName, Boolean throwOnError)
at Microsoft.SharePoint.BusinessData.Infrastructure.LobSystemInstancePropertyParser.GetSsoProvider(String ssoProviderTypeName)
Hello Everyone
I created user profile synchronization connection. And selected everything in the container(active directory). And then started full synchronization.
But after synchronization, i just see only one user which is install service account. Do i need to do anything else on central admin?
Please advice
Thanks
Hi,
While clicking Sharepoint Apps link i am getting below error:
"Sorry, we can't seem to connect to the SharePoint Store. Try again in a bit "
And i have already configured SharePoint App Store with Domain URL
Kindly suggest proper steps
Hi All,
We receive SPH issue for WFE-1 as "Product / patch installation or server upgrade required."So pls suggest to fix this issue.
Note: we installed many lang pack and its SP1 all got throws error as below
As part of troubleshooting.we did the following things
1. We ran the config wizard
2. SP Cache clear even the error is not solved. could you pls suggest to fix this issue
Thanks David Kenneth
Hi everyone,
I've spent much time reading many articles about the new SharePoint 2013 Apps model and know fundamentally the following options:
Using the provider-hosted option, my app is hosted on a separate server in my company or in a server hosted in somewhere. Using the auto-hosted option, app is hosted in the cloud and Windows Azure and SQL Server Azure components are provisioned automatically when an app is installed. In my case, I'm a bit confused and have two questions:
Any suggestion would be greatly appreciated. Many thanks
Regards,
-T.s
Thuan Soldier
A 23-year-old man loving Microsoft technologies and making crazy ideas on business journey.
SharePoint Vietnam |
Blog | Twitter